|
Single
and Three Phase - Fan
and Blower - ODP, Resilient Base
1/4
thru 3 Hp NEMA 48 thru 56H
Applications:
Ventilators, summer cooling fans, band saws, drill presses,
farm
equipment.
Features:
Heavy gauge steel base, ball bearings, suitable for mounting in any
position. Dynamically balanced rotors for reduced vibration and quiet operation.
Three
Phase - Chiller/Cooling
Tower - TEAO
5
thru 75 Hp NEMA 184T thru 365T
Applications:
For use in the airstream on cooling towers.
Features:
1.15 Service Factor, corrosion resistant epoxy finish, double sealed
bearings filled with moisture resistant grease, Inpro/Seal® labyrinth bearing
isolator, class F insulation, moisture resistant copper windings, double
dipped and baked, stainless steel nameplates and corrosion resistant hardware.
Designed for wet, high humidity environments.
Three
Phase - ODP, Resilient
1/2
thru 3 Hp NEMA 56 thru 182T
Applications:
Heating, ventilation and air conditioning blower and fan
motors.
Features:
Heavy gauge steel base, ball bearings, automatic thermal
overload.
Suitable for mounting in any position. Dynamically balanced rotors
for reduced vibration and quiet operation.
Three
Phase - ODP, Resilient
and Rigid Base
1/2
thru 5 Hp NEMA 56 thru 184T
Applications:
Ventilators, direct-drive or belted fan and ventilation applications.
Features:
Heavy gauge steel base, ball bearings, suitable for mounting in any
position. Dynamically balanced rotors for reduced vibration and quiet operations.
Three
Phase - HVAC Variable
Torque - ODP
1/2
thru 75 Hp NEMA 56 thru 365T
Applications:
Heating, ventilation and air conditioning fans and blowers.
Features:
Heavy gauge steel frame construction, ball bearings, 1.15 service factor.
Dynamically balanced rotors for reduced vibration and quiet operation. Suitable
for mounting in any position. "HM" models meet EPAct
efficiencies. "EHM"
models have higher efficiencies.
Three
Phase - HVAC Variable
Torque - TEFC
1/2
thru 75 Hp NEMA 56 thru 365T
Applications:
Heating, ventilation and air conditioning fans and blowers.
Features:
Heavy gauge steel frame construction (1-10 hp), ball bearings, 1.15
service factor. Dynamically balanced rotors for reduced vibration and
quiet operation. Suitable for mounting in any position. "HM"
models meet EPAct efficiencies.
"EHM" models at higher efficiencies (not NEMA
Premium™).
Single
Phase (PSC) - Direct
Drive Fan - TEAO, Resilient
and Rigid Base
1/4
thru 3/4 Hp NEMA 48Z thru 56Z
Applications:
Confinement houses, exhaust fans, air handling fans,
unit
heaters.
Features:
Double sealed ball bearings, rugged steel frame, corrosion
resistant
epoxy finish. 1" extended thru bolts. Permanent split capacitor.
Three
Phase - ODP Condenser
Fan, "Belly Band"
Round Body - Air Over
1/2
thru 1 1/2 Hp NEMA 48YZ and 56YZ
Applications:
Designed specifically for use on commercial refrigeration condenser
units and air conditioning units.
Features:
Corrosion resistant finish, ball bearings, dynamically balanced for quiet
operation. Automatic reset thermal. Shaft 6" long - keyway and flat
are 90° apart. Reconnectable leads in
pulley endplate.
Three
Phase - Air Over - TEAO,
Rigid Base
1/4
thru 10 Hp NEMA 48 thru 254T
Applications:
"In the Airstream" and fan-on-shaft applications.
Features:
Locked drive end bearing construction, bearings sized for larger
overhung
loads for fan-on-shaft applications. Leads 36".
|
